Industrial and commercial flooring services
Eight floor systems for plants, warehouses, kitchens, showrooms and garages. Every one starts with the same thing: proper surface prep and a system chosen for your real conditions.
Choose a system
Not sure which one fits? Tell us what the floor goes through every day and we'll specify it for you.
Industrial epoxy
High-build, multi-layer systems for heavy loads, chemical exposure and non-stop operations.
Industrial epoxy details
Polished concrete
We grind and densify the slab itself, so there is nothing to peel, delaminate or recoat.
Polished concrete details
Urethane concrete
Thermal-shock resistant, chemical-proof and slip resistant for the harshest environments.
Urethane concrete details
Epoxy wall & cove
Floor-to-wall protection with no joints where bacteria and moisture can hide.
Epoxy wall & cove details
Decorative epoxy
Flake, quartz, solid and multi-color finishes that turn plain concrete into a statement.
Decorative epoxy details
Warehouse striping
Forklift lanes, walkways and hazard zones laid out right the first time, to OSHA color codes.
Warehouse striping details
Joint & crack repair
Stabilize, fill and grind flush, as a standalone fix or before any coating goes down.
Joint & crack repair details
Garage & basement
Flake, solid and polyaspartic systems that shrug off oil, moisture and daily use.
Garage & basement detailsWhich system fits which floor
A quick guide from the jobs we do most. The site assessment confirms it.
Forklifts, chemicals, heavy loads
Industrial epoxy, or urethane concrete where there is also heat or steam.
Washdowns and sanitation codes
Urethane concrete on the floor, epoxy wall and cove at the walls.
Large warehouse or distribution floor
Polished concrete for a dust-free surface, plus striping for traffic lanes.
Showrooms, lobbies, customer areas
Decorative epoxy in flake, quartz, metallic or solid color.
Cracked or spalled slab
Joint and crack repair, on its own or before any coating.
Home garage or basement
Flake or solid epoxy with a polyaspartic topcoat, after a moisture test.
The prep is the product
Shot blasting or diamond grinding, crack and joint repair, then the system. We never shortcut the first steps, because that is where floors fail.
Consultation and site assessment
We evaluate chemical exposure, traffic loads and floor conditions to specify the right industrial epoxy system.
Surface preparation
Shot blasting and diamond grinding open the concrete profile and remove all contaminants for maximum adhesion.
Crack and joint repair
All cracks, spalls and damaged areas are repaired and ground flush before the epoxy system is applied.
Primer coat
A penetrating epoxy primer seals the concrete and creates the chemical bond the build coats rely on.
High-build coats
One or more high-build epoxy coats are applied to reach the specified thickness and performance level.
Topcoat and final finish
A chemical-resistant topcoat seals the system, adds the final finish and locks in long-term performance.
Get the right floor specified
Send us the square footage, how the space is used and any photos you have. We usually reply within 24 hours.